4
G
Step 1:
Bolt steel footplate to each of four sup-
plied posts “A” as shown. Use hardware
“M”, and “O”.
Step 2:
Step 3:
H
Step 4:
O
M
D
D
F
E
E
X
X
K
Q
I
N
L
Attach rectangular mending plates
“I” to canopy beams as shown.
Attach beams “G” to beams “H” (x2) ,
and beams “I” to “I” (x3)
With arch beams “J” laying flat
on ground,
bolt Together (X4) using
supplied
hardware bolts “N”, and mending plates
J
Apply construction
adhesive to boards on
one side and bolt beams
together as shown
using bolts “P” with a nut and washers. Bolt
heads should be on the side comprised of beams
“E”
(Do not use bolts in holes marked with an X
above.
) Repeat for opposite side ledger
beam. In-
sert 2” wood screws “S” into pre-drilled
holes near
ends of beams “D” once bolts are in place and tight-
I
K
