8 |
P a g e
Gas Connection
1.
Remove stainless steel top (if applicable) and lift
burner out of base to expose control valve.
2.
Connect the incoming gas hose to the valve and
using two wrenches tighten securely. Repeat
with flexible metal gas line from the valve to the
underside of burner. It is not recommended to
use Teflon tape or pipe dope on the connection
to the valve with flare fittings.
LPG installations use the hose and regulator
provided with the burner.
For Natural Gas hookup information and any
other info not listed here consult your Crystal
Fire owner’s manual.
Attach incoming
gas here
Read and understand your Crystal Fire owner’s manual
before beginning burner hookups or using the device.
NOTE: Check for proper orifice size for the type of gas you are
using. NATURAL GAS: #31 , LIQUID PROPANE: #43
(orifices are screwed into the end of the burner “neck” and
have their size stamped on the outside)
Summary of Contents for Providence Fire Pit
Page 14: ...14 P a g e...
Page 15: ...15 P a g e...
