10 |
P a g e
3.
To properly install ignition system, a spark and ground wire
need to be attached to the igniter box.
Make sure both black wires attached to the burner are
securely plugged into the backside of the sparker box
as shown.
Ensure that an AAA battery is installed in the sparker
box with the positive (+) side facing outward. Test
system by depressing the button on the igniter. A
continuous repeating spark between the igniter
electrode and spark-receiving probe means everything
is connected properly. Consult the troubleshooting
section of burner owner’s manual if spark is weak,
intermittent, or not present.
4.
Once ignition system is grounded and gas
connections are secured and checked for
leaks, set the burner back into its original
position and replace stainless steel top if
applicable.
Summary of Contents for Providence Fire Pit
Page 14: ...14 P a g e...
Page 15: ...15 P a g e...
