4
Included with your Fire Pit
A.
4 Fasteners
B.
4 B-Bolts
C.
4 C-Bolts
D.
4 Bolt Caps
E.
Touch-Up Paint Bottle
Assembly Instructions
55
1.
Unpack contents from box, and remove individual packaging from each
piece.
2.
Lay Side Panel with Control Panel on soft, flat surface.
3.
Position Support Piece on the Side Panel. NOTE: It is very important to
positon the Support Piece as shown in the picture below, to ensure that
your burner and propane tank fit correctly with your fire pit table base.
Assembly Instructions
1.
Unpack the fire pit table contents from the box, and remove individual
packaging from each piece.
2.
Lay
Panel A
on soft, flat surface.
3.
Position
Center Support
on
Panel A
.
NOTE:
it is very important to place the
Center Support
exactly as shown in
the picture below. This will ensure that your burner (and propane tank, if
applicable) will fit correctly with your fire pit table base. (Refer to “Included
with Your Fire Pit” for component details).
NOTE:
curve facing
inward toward
Control Panel.
4. Attach
Center Support
with
Bolt A (x2)
.
A
A
Panel A
