5.
Once all the nuts and bolts are in place, securely tighten all the
bolts (
F
) and nuts (
J
), including the ones at the front part on the rocker.
Cover all nuts (
J
) and bolts (
F
) with nut cover (
L
) and bolt cover (
K
).
mechanism.
4.
Insert bolts (
F
) through flat washer (
H
), the metal plates (
I
), support
bar, spring plate and the metal plates (
I
) as showed in the diagram. Secure
bolts with flat washers (
H
), lock washers (
G
), and nuts (
J
). The support bar
and spring plate should be sandwiched in between the metal plates (
I
).
6.
Put the seat cushion (
C
) and back cushion (
D
) (As shown below).
8.
Test the swivel rocker gently. If the rocker does not rock
properly, double check the assembly procedure.
Your Lyndale Chairs include either Sunbrella™ Cast Ash or Cast Slate fabric. There is
typically a break in period to achieve maximum comfort. If you wish to accelerate that
period, you can place the cushions on a clean, dry surface and walk on them.
For general cleaning, you can brush of any dirt or debris and clean with a mild solution of of
water and soap. Rinse thoroughly to remove all soap residue and air dry. For more
detailed care, cleaning and stain removal, please visit
*Optional lumbar pillows available: Part Number – LSR-CPL*
42479 REV A 09.06.17
7.
Secure back cushion (D) to chair frame (A) with the use of Velcro
straps.
