INCLUDED PARTS
ASSEMBLY INSTRUCTIONS
2.
Place the chair seat (
A
) upside down on a non-abrasive flat surface.
1.
Remove all protective material carefully. Avoid cutting the surface
of the furniture while removing the packaging material.
3.
Align the holes on the support bar (
M
) on the underside of the chair
seat with the holes on the spring plates attached to the t-rocker. Make
sure the arrow labels on the rocker mechanism and chair support bar are
facing the same direction—towards the front of the chair.
1.
Check for damage. Do not use damaged components.
Warning: Improper assembly may result in serious personal injury
.
F
-
Bolt 5/16 * 1.575” (8X)
I
-
Metal Plate (8X)
H
-
Flat Washer (16X)
J
–
Nut (8X)
G
-
Lock Washer (8X)
L
-
Nut Cover (8X)
K
-
Bolt Cover (8X)
A
-
Chair Seat (2X)
B
-
Chair Base (2X)
M
-
Support Bar (2X)
REQUIRED TOOLS
• Utility Knife
To cut and remove packaging
• Wrench
For tightening components on chair
42479 REV A 09.06.17
D
-
Back Cushion (2x)
• LSR-CS-RC
• LSR-CA-RC
C
-
Seat Cushion (2x)
• LSR-CS-RC
• LSR-CA-RC
