9
Before operating your fire table, ensure all gas connections are properly
tightened and thoroughly leak checked. Refer to the Crystal Fire® Plus Manual
for information on proper leak checking and other critical safety information.
With the valve on the fire pit in the OFF
position, open the valve on the propane tank
or natural gas supply.
Double check to make sure there are no gas
leaks at the regulator or inlet side of the
valve. If leak is detected, immediately shut off
the gas supply and wait 5 minutes to allow
gas to dissipate. Fix any leaks before
proceeding.
Press the sparker button and hold, look and
listen for spark between electrode and
grounding rod.
While depressing the sparker, open the valve.
3. Turn valve to ON
2. Look/listen for spark
1. Depress sparker
If burner does not light after 10 seconds,
close the valve and wait 5 minutes to allow
gas to dissipate before attempting ignition
again.
Refer to the Crystal Fire® Plus Manual included with your burner
for more detailed information on operation, maintenance, and
safety of your burner.
Operating Instructions
11.
