4
Do not discard any packaging until assembly is complete and unit is
tested. Keep all included manuals in a safe place for future reference.
Warning:
Exposed edges may be sharp, use leather gloves when
removing packaging and handling the base. Do not remove protective
cardboard packaging until you have placed the fire pit in its desired
final location.
Assembly Instructions
Locate CF-SPARKER inside of crystal fire burner box.
Remove CF-SPARKER cap and hex nut. Insert AAA battery
(not included) with + end out.
Install CF-SPARKER into control panel as shown below.
Depress CF-SPARKER button to test your sparker.
Un-packaging
1.
Base Placement
2.
CF-SPARKER Installation
3.
Place base in desired final location.
Place on a hard, flat surface. Avoid soft surfaces and
areas that collect water.
Refer to Crystal Fire® Plus Manual included with your
Crystal Fire® Plus Burner for safety information
regarding the placement of your fire pit.
Locate and orient
sparker box on
control panel as
shown. Sparker box
must be installed
before burner valve.
