background image

WARNINGS

WARNINGS: LP TANK

Page 5 of 15

Page 6 of 15

LP TANK REMOVAL, TRANSPORT AND STORAGE:

1.  Turn control knobs OFF at regulator and LP tank valve. Turn coupling nut counterclockwise by 

hand only. NEVER use tools to disconnect. 

2.  Place dust cap on cylinder valve outlet when the cylinder is not in use. 

HINT:

 Only install the type of dust cap on the cylinder valve outlet that is provided with the 

cylinder valve. Other types of caps or plugs could cause leaking.

3.  A disconnected LP tank in storage or being transported must have a safety cap installed. 

NEVER leave an LP tank in a car that can become overheated by the sun.

4.  The cylinder must be stored outdoors out of the reach of children. NEVER store the cylinder in 

enclosed spaces such as a garage, carport, covered porch or any other structure.

5.  Turn gas OFF at supply cylinder when not in use.

LP TANK:

The LP tank must meet the following requirements in order to be used with your appliance: 

‡

  Measurements must be 12” (30.5cm) in diameter by 18” (45.7cm) high with 20lb. (9.1kg) 

maximum capacity.

‡

  The LP gas supply cylinder must be constructed and marked in accordance with the 

National Standard of Canada (CAN/CSA-B339), Cylinders, Spheres and Tubes for the 
Transportation of Dangerous Goods.

The LP tank must include the following: 

‡

  QCC Type 1 outlet compatible with regulator or appliance.

‡

  Safety relief valve.

‡

 

hand wheel. Only use tanks equipped with this type of valve. 

‡

  LP tank must be arranged for vapor withdrawal and include collar that protects LP tank valve.

‡

  LP gas is odorless, non-toxic, and colorless when produced. For your safety, LP gas has been 

given an odor (similar to rotten eggs) so you can smell if there is any leaking.

‡

 

‡

 

and increase the risk of serious injury or death. If the steps 
causing personal injury or death can occur. 

‡

  NEVER store a spare LP gas cylinder under or near this appliance.

‡

 

‡

  If you smell, see or hear leaking gas IMMEDIATELY get away from the LP tank and contact your 

FIRE DEPARTMENT.

 DANGER

Indicates a hazardous situation, which if not avoided, will result in death or serious injury.

ONE USED. Replacement pressure regulator and hose assemblies must be those supplied by the 
manufacturer.

‡

  NEVER use a cooking vessel larger than the capacity and diameter recommended by the 

manufacturer. 

‡

 

proper water levels. 

THIS APPLIANCE IS INTENDED FOR USE WITH WATER ONLY.

‡

 

and severe burns from water 

splatter. 

THIS APPLIANCE IS INTENDED FOR USE WITH WATER ONLY.

‡

  Avoid bumping of or impact with the appliance to prevent spillage or splashing of hot cooking liquid.

‡

  Never drop food or accessories into hot cooking liquid. Lower food and accessories slowly into the 

care shall be taken to avoid burns from hot cooking liquids.

‡

  Check and clean burner/venturi tubes for insects and insect nes

beneath the appliance.

‡
‡0DLQWDLQSURSHUFOHDUDQFHVIURPFRPEXVWLEOHFRQVWUXFWLRQWK

e minimum clearance shall be at least 

   10 ft (3 m) from any structure or combustible material.

‡'RQRWOHDYHWKHDSSOLDQFHXQDWWHQGHG.HHSFKLOGUHQDQGSHW

s away from the appliance at all times.

 

tilation.

Summary of Contents for Crawfish Keg










Reviews: