To avoid excessive wear and extend the life of the Fish Cat Scout we recommend transporting this craft in a Outcast Sporting
Gear boat bag or cover with clean, dry tarp. Do not load other equipment, particularly heavy or sharp objects, on top of the
craft. If you transport your boat in an open truck bed please make sure all sharp objects are removed because more boats are
damaged in transport than on the water.
Valve caps should always be in place whenever transporting an inflated boat.
Transport
Scan QR code for raft cleaning video
Your inflatable boat is constructed with high quality materials and superior workmanship however, as with all outdoor
equipment proper cleaning and maintenance will extend the use of the product and allow it to perform better. Most damaging to
your inflatable boat are extended UV exposure, insect repellents, mold and mildew.
To keep your boat performing at its best, please following these simple instructions.
• Do not set your boat on sharp objects.
• Do not over inflate your boat.
• Keep the zippers clean.
• Clean the boat with soap and water.
• Allow the boat to dry before rolling.
Valve does not retain air when pump is removed.
• Clear any debris that might be preventing the valve from sealing. This can be accomplished by either pumping
quick bursts of air into the valve or removing the core valve assembly and cleaning the valve with a cotton swab and
denatured alcohol.
• Tighten valve with the valve wrench if necessary.
Fish Cat Scout becomes soft after the inflation process.
• Top off air pressure in the cold water to counter thermal contraction.
• Determine which air chamber is soft. Make sure the valve is functioning correctly, with no signs of leaking.
• Find the hole in the AIREcell and patch with the Tear Aid patch.
Zipper is difficult to operate.
• Use a combination of soap, water and an old toothbrush to clean the zipper.
Tear Aid patch does not stick to the AIREcell.
• Make sure the area to be patched is dry and clean. Use the alcohol pads to prep the area.
Basic Troubleshooting
• It is best to store your Fish Cat Scout to soft pressure under a cover or car port that provides protection from environmental
elements. This will help prevent weather and UV damage and will keep your AIREcells aligned.
• Allow your Fish Cat Scout to air dry 24-48 hours before rolling for long term storage.
• Screw oar stem knob back onto the oar stem before rolling to protect the PVC.
• Do not stack or load other gear or equipment on top of your rolled Fish Cat Scout.
• Be aware of folded and rolled corners of the Fish Cat Scout, these areas are susceptible to damage when being dragged or
moved around on concrete or gravel.
• Keep away from heat sources such as open flames, furnaces, and water heaters.
• Store in a cool and dry place protected from UV light.
• Store your boat in a boat bag, heavy tarp, or cloth.
• Store inside or up off the ground to keep it away from mice.
Storage Tips
Cleaning and Maintenance