www.outcastboats.com
~ 800-966-0976
1. Valve does not retain air when pump is removed.
• Clear any debris that might be preventing the valve from sealing. This can be accomplished by either pumping quick bursts of air
into the valve or removing the core valve assembly and cleaning the vavle with a cotton swab and denatured alcohol.
• Make sure that the core valve assembly is tight. Tighten valve if necessary.
2. Tube becomes soft after inflation process.
• Determine which air chamber is soft. Make sure the valve is functioning correctly, with no signs of leaking.
• Find the hole in the AIREcell and patch with the Tear Aid patch.
3. Tube is puckered or shows a void when inflated.
• The AIREcell might be misaligned. Deflate the tube(s) and as they are brought back up to pressure, manipulate the tube(s) to
free the AIREcell as it inflates. If this does not fix the problem, deflate the boat, open the zipper and adjust the AIREcell.
4. Zipper is difficult to operate.
• Use a combination of soap, water and an old toothbrush to clean and clear the zipper of debris.
5. Tear Aid patch does not stick to AIREcell.
• Make sure the area to be patched is dry and clean. Use the alcohol pad to prep the area.
Basic Trouble Shooting
Storage
Short Term Storage
- Allow to air dry, deflate and roll loosely
Long Term Storage
-
Store your boat dry and clean
. After use, rinse off all debris and allow the boat to air dry on soft pressure and out
of direct sunlight. Residual water inside the bladders/AIREcells will not damage the boat. Store the boat in a cool, dry place out of
sunlight and away from exhaust fumes. If you store your boat inflated you should be able to pinch an inch of material.
Transport
To avoid excessive wear and extend the life of this craft we recommend transporting this craft in a Outcast Sporting Gear boat bag or
cover with clean, dry tarp. Do not load other equipment, particularly heavy or sharp objects, on top of the craft. If you transport your boat
in an open truck bed please make sure all sharp objects are removed because more boats are damaged in transport than on the water.
VALVE CAP SHOULD AWAYS BE IN PLACE WHENEVER TRANSPORTING YOUR BOAT.
Cleaning and Maintenance
Your inflatable boat is constructed with high quality materials and superior workmanship however, as with all outdoor equipment proper
cleaning and maintenance will extend the use of the product and allow it to perform better. Most damaging to your inflatable boat are
extended UV exposure, insect repellents, mold and mildew.
To keep your boat performing its best please following these simple instructions.
• Do not set your boat on sharp objects.
• Do not over inflate your boat.
• Keep the zippers clean.
• Clean the boat with soap and water.
• Allow the float tube to dry before rolling.
