www.outcastboats.com
~ 800-966-0976
LCS Stripping Apron Installation:
1. Secure left side apron stays into the stay pockets on the Fish Cat 4 - LCS. The rear apron
stay pocket is located 5” from the front edge of the seat.
2. Once seated in the Fish Cat 4 - LCS, insert right side of apron stays.
3. The apron stays come extra long, trim stays so the Stripping Apron is 2” above your thighs.
Float Tube Inflation:
Items Needed
:
1. Close core valve assemblies
and open valve cap.
2. Inflate the Fish Cat 4 - LCS
to about 2.0 PSI using the
hand pump and Boston valve
adapter. A good rule for
gauging the proper pressure
is to push with your thumb at
the center of the tube, when
you can deflect about 3/4”
from the top surface of the
tube, it will be close to 2.0 psi.
3. The air chambers should be evenly inflated to prevent disfiguration of the float tube.
TO DEFLATE: Loosen the core valve assembly of the Boston valve. (turn counter-clockwise)
pic. 10
Valve Base
Core Valve Assembly
Valve Cap
Changes in air temperature and elevation could cause the air inside the Fish Cat 4 to
expand which could cause the tube to burst.
Never leave your fully inflated float tube sitting in direct sun out of the water.
Always release some air when these conditions occur.
Items Needed
:
Fish Cat 4 - LCS
Hand Pump
Boston Valve Adapter
Fish Cat 4 - LCS
LCS Stripping Apron
