Step 1: Verify package contents
Tent : 1 each
(B) Fly 1 each
(A) Main 2 each
Step 2: Assemble poles
1) Assemble the tent poles by placing
fibreglass sections into the metal ferrules.
Three poles are provided:
2 each (A) Fibreglass Main Poles
1 each (B) Fibreglass Fly Pole
Fibreglass Poles : 3 each (total)
Rainfly : 1 each
Tent Stakes : 7 each
IMPORTANT NOTES:
* Assemble your tent before camping to become
familiar with the assembly.
* Two people are recommended for setup.
* Select a clean, level area for the campsite, free
of debris and sharp objects, away from a
natural watercourse.
* Use of a ground cloth is recommended to
prolong the life of the tent floor and provide
additional insulation and moisture protection.
* To prevent damage to the zippers, unzip the
doors and windows of the tent prior to
disassembly, allowing air to move freely.
* Seam seal the inside stitched seams of the tent.
This will improve weather resistance. Available
in sporting goods departments. Discolouration
may occur if applied to outside seams.
Step 3: Spread out tent, insert poles
1) Spread out the tent flat, floor side down.
2) Locate main pole sleeves and insert tent
poles (A) so the poles cross at top of the
tent.
Step 4: Secure main poles
1) With a person holding each end of a main pole (A), flex the pole into an arch. Carefully
place the ends onto the pins located at the stake loops.
2) Repeat this step for the remaining main tent pole (A).
Step 5: Fasten hooks
1) Clip the plastic hooks on the tent to the
fibreglass pole frame.
CTC161007(076-5452-4)
ASSEMBLY INSTRUCTIONS
A
A
A
A
CTC161007 05/15
