Assembly
Fig. 2
Fig. 3
Fig. 1
Fig. 4
E
C
B
F
B
C
E
H
G
F
G
H
UNPACKING
CAUTION:
Obtain the aid of an assistant when handling large
or heavy grill components.
1. Remove all packing material from around grill exterior.
2. Open Firebox lid and remove packing materials and
components from inside Firebox.
3. With the aid of an assistant, lift the Firebox out of the
shipping box and place on protected flat surface. Be careful not
to damage hose and regulator.
4. Refer to Parts Lists to check that all parts are present.
5. Inspect the grill for damage as you assemble it. Do not
assemble or operate the grill if it appears damaged.
IMPORTANT:
Refer to the package Contents and Hardware
Contents on page 4, 5and 6 when assembling Grill Cart.
1. Grill Cart Assembly
(a) Firstly, attach two Cart Leg Foots (D) to left side legs B&C.
Then use 4 AA Round Head Screws and 4 BB Lock Washers to
attach Side Panel, Left (E) to Cart Leg, Rear Left (C) and Cart
Leg, Front Left (B). Attach so that flat surface of Side Panel will
be on Grill exterior. See (Fig. 1).
(b) Use 4 CC Round Head Screws and 4 DD Lock Washers to
attach Cart Brace, Left (F) to Cart Leg, Front Left (B) and Cart
Leg, Back Left (C). Attach Cart Brace so that flat side will face
Cart Interior and wide lip faces down. See (Fig. 2).
(c) Using 4 AA Round Head Screws and 4 BB Lock Washers to
attach Side Panel, Right (E) to Cart Leg, Rear Right (H) and
Cart Leg, Front Right (G). Attach so that flat surface of Side
Panel will be on Grill Exterior. See (Fig. 3).
(d) Use 4 CC Round Head Screws and 4 DD Lock Washers to
attach Cart Brace, Right (F) to Cart Leg, Front Right (G) and
Cart Leg, Back Right (H). Attach Cart Brace so that flat side will
face Cart Interior and wide lip faces down. See (Fig. 4).
Remark: The lighting stick is preassembled on the Cart Leg,
Front Right (G)
7
D
AA
BB
E
DD
CC
AA
BB
CC
DD
