11
14
13
Connect the side burner electrode wire to the side burner ignitor as shown.
WARNING: BEFORE OPERATION, ENSURE SIDE BURNER WIRES ARE CONNECTED TO
IGNITOR. IF THE CIRCUIT IS NOT COMPLETED, THE IGNITOR WILL NOT SPARK!
Step
②
Step
①
Step
③
Step
④
C4
D13
C5
Unscrew the pre-assembled Wing Nut (D13) from the Side Burner (C4). Insert the wire of the Side
Burner Electrode (C5) through the side burner base; make sure it is installed in correct position as
shown. Feed the venturi tube of the side burner through the central hole in the bottom of the side
burner base, then fix it and the side burner electrode onto the side burner base using the wing
nut.
Make sure that the end of the venturi tube is set over the gas outlet of the side burner
valve.
D13
