Operation
14
900-0138-01-00 Rev
A
To update the firmware using an FTP site and the SD Card:
1.
Connect to the AXS Port using the FTP site.
2.
Copy the update file from the OutBack website to the UPDATEFW directory on the microSD card.
NOTE
: It may be necessary to create this directory on the SD card first, using the FTP client.
3.
Once the update file is copied, disconnect the FTP client from the AXS Port.
4.
The AXS Port will detect the disconnection of the FTP client and will automatically update the
firmware if the correctly named file is found in the UPDATEFW directory. After a successful
firmware update, the update file will be erased from the UPDATEFW directory.
Email Functions
The AXS Port can send email messages with alarms or other status reports. To enable the email
function in the AXS Port, certain fields in the OutBack block must be set up using Modbus client
software. (See Table 1 on page 8.)
Table 4 Email Setup
Field Value
OutBack_SMTP_Server_Name
Email account name, such as
outbackpower.com
OutBack_SMTP_Account_Name
Name of SMTP server for sending mail, such as
smtp.gmail.com
OutBack_SMTP_Account_Name
Email account name, such as
outbackpower.com
OutBack_SMTP_Email_User_Name
Email user name, such as
OutBack_SMTP_Email_Password
Email user account password, such as
mypassword
OutBack_Status_Email_Subject_Line
Status email subject line text
OutBack_Status_Email_To_Address_1
First recipient address
OutBack_Status_Email_To_Address_2
Second recipient address
OutBack_Status_Email_Interval
Number of hours between status email (1-23)
NOTE
: 0 = status email disabled
OutBack_Status_Email_Status_Time
First hour within day that status email will be sent (0-23)
Messages will be sent to the designated recipient addresses starting at the time indicated, and
repeating at the appropriate interval.
For example, if
OutBack_Status_Email_Status_Time
is set to 10 and
OutBack_Status_Email_Interval
is set to 4, then a status email will be sent at 10 AM, 2 PM, 6 PM, and 10 PM.
