OutBack Power Alino TL Series, Owner'S Manual

Page: 40 / 48

Troubleshooting
40
900-0248-01-00 Rev A
Table 8 Error Codes (with unit failure and alarm)
Code Reason for Failure Notes
F01
Both of the unit’s fans have failed. This may require service.
F02
Temperature is too high.
The unit will recover after reaching the set
point in item
07 . (See page 32.)
F03 Battery voltage is too high. This can be corrected externally.
F04 Battery voltage is too low. This can be corrected externally.
F05
Output is short-circuited, or internal over-temperature
is detected.
This may be able to be corrected externally.
F06 Output AC voltage is too high. This may require service.
F07
Overloaded output (timeout has expired) or
overloaded PV input.
The unit will recover after reaching the set
point in item
06 . (See page 32.)
F08 Internal bus voltage is too high. This may require service.
F09
Internal bus soft start failed. This may require service.
F51 Overloaded output. This can be corrected externally.
F52 Internal bus voltage is too low. This may require service.
F53 Incorrect voltage is present at AC output. This may require service.
F55
Unbalanced AC output. This may require service.
F57 Current sensor failed. This may require service.
F58 Output AC voltage is too low. This may require service.
F59
PV input voltage is too high. This can be corrected externally.
Table 9 USB Fault Codes
Code Reason for Failure
U0 1 No USB device detected.
U02 Device is copy-protected.
U03
Device contains a document with the wrong format.
NOTE:
These codes may appear when a USB device is inserted and a problem is detected.
They appear for 3 seconds before the display returns to the main screen.
Figure 31 Troubleshooting Features
Circuit
Breaker
AC LED Indicator
Fault LED Indicator
Fault codes
(error or
warning)
displayed here