1
Insert the lower post assembly
(11) into the base
assembly (16) and then fix
it tightly by means of 4-
M6X30 screw, and insert
the clamp (12) into the
lower post (11). (fig.1)
2
Join the Lower Post Assembly
(11) and the Middle
Post (9) together with
3-M5X6 screw (fig.
3
Join the Upper Post Assembly
(7) and the Middle
Post (9) together with
3-M5X6.screw (fig.3)
4
Join the Heating Element Assembly
(1)
and the Upper Post
Assembly (7) together ,then
fix them tightly by rotating
the Knob, and put the power
cord supply into the
clamp.(fig.4)
5
According to the request of
use angle, Heating Element
Assembly can adjust Angle at
0º~45º.(Fig.5)
OPERATION
The appliance is switched on by means of the pull switch (5). The slight vibration noticeable when the appliance
is switched on will stop after a few seconds.
6-OUTPUT
-Position 0: Stop
-Position 1: 650W (normal power)
-Position 2: 1300W (intermediate power)
-Position 3: 2000W (full power)
Summary of Contents for SMQ2000A
Page 27: ......
