Oursson MS2060, Instruction Manual

Page: 12 / 58

12
POSSIBLE PROBLEMS AND SOLUTIONS
Possible problems Possible causes Solutions
Device doesn’t turn on. There is no voltage in the socket. Unplug the device and wait until the voltage
normalizes.
Device stopped working Maybe the automatic engine overheat
protection turned on
Unplug the device and let it cool for 15-20 min.
Then plug it again and turn it on.
If the problem persists contact OURSSON ser -
vice center.
Device works slow A solid ingredient got stuck Turn off the device and unplug it. Remove the lid
turning it counter clockwise. Remove the stuck
ingredient.
SPECIFICATIONS
Model MS2060
Power consumption, W max 200
Rated voltage 220-240 V~; 50-60 Hz
Protection class II
Storage and transportation temperature -25°C tо +35°C
Operation temperature +5°C tо +35°C
Humidity Requirements 15-75% without condensation
Size of the device, mm 336х206х200
Weight, kg 1,9
*
Products must be stored in dry, ventilated warehouses at a temperature not lower than -25°С.
CLEANING AND MAINTENANCE, Рiс. D
• Clean all the parts of the device immediately
after use.
• If liquid got between the body
12
and cup
11
wipe the body dry and then use the device
again, Pic. B-2.
• Turn off the device. Unplug it.
• Remove the pusher from the feeding chute.
• Make sure that the moving parts stopped. After
that remove detach the cup’s lid turning it counter
clockwise, Pic. D-1.
• Remove the disc holder or shredder
9
from the cup,
11
and remove the nozzle holder
10
. Detach the disc
and holder
8
, Рiс. D-2.
• Remove the cup from the body turning it counter
clockwise, Pic. D-3.
• All removable parts of the device can be washed in
the dishwasher, Pic. D-4. Water temperature must
not be higher than 60°C.
• Wipe the motor unit with a soft damp cloth. In
order to prevent electrical shock do not immerse
the motor unit into the water.
• Thoroughly dry all the parts after cleaning and store
in dry clean place.
PRODUCT CERTIFICATION
For information on product certification, see http://www.oursson.com or ask seller for a copy.
Only a qualified specialist from OURSSON AG service center must do the repair.