Oursson IP1210T, User Manual

Page: 12 / 18

General description
12
• preheat mod.
After setting power level, you should touch button 1 time to choose the preheat
mode. The preheat mode light goes on. The display shows the temperature 60°C, power hearting level
lights shows 100 Watt. These values are set by default. Your induction plate is in preheat mode.
• stir frying mode. After setting power level, you should touch button 3 time to choose the stir frying
mode. The stir frying mode light goeson. The display shows the temperature 160°C, power hearting
level lights shows 600 Watt. These values are set by default. Your induction plate is in stir frying mode.
You may use the
and buttons to adjust the power heating level or the temperature.
the setting And using preheAt And stir frying modes
Tip: You can’t to adjust the power level and temperature in a preheat mode.
Note: You may use BOOST mode during cooking after setting the power heating level.
• Touch the button one time during the cooking mode, the cooking time light goes on. The
induction plate is in stand-by mode to set the cooking time. Set the cooking time by using the
and buttons. When you press the and buttons, riefly, the time increases or decreases by
1 minute. When you press the buttons longer, the time increases or decreases by 10 minutes. You may
set the cooking tome from 0 to 180 minutes. After you stop to set the cooking time, the display shows
preset cooking time. The countdown starts automatically.
• If you set preheat or stir fry mode with cooking timer mode together, the display shows the value of
each modes by rotation.
• After the cooking time finish countdown the induction plate stops heating and switch on to stand-by
mode.
• The default value of cooking timer is 1 hours.
cooking time set mode
• If you need the maximum power of heating level in any time during cooking, please touch the
Boost button one time. The induction plate automatically switch to the maximum power heating
level 2100 Watt, the boost mode light goes on.
• To stop the Boost mode, touch the Boost button again one time, the boost mode light goes
OFF and the induction plate back to the preset heating power level.
• You may stop BOOST mode also by touch button.
Boost mode