Oursson IP1210T, User Manual

Page: 11 / 18

General description
11
You can simply operate the appliance manually
You can simply operate the appliance manually
You may use two ways to set and adjust the heating temperature:
• Put the mains plug in the wall socket, the appliance produce a 2-second beep. «l» shows and blink on
the display. The induction plate goes to the stand-by mode.
• Touch the button to switch on the induction plate, display shows «– – – –» .
Tip: The induction plate automatically switch to the stand-by mode if you don’t touch any key after less
1 minute. The appliance produce a 2-second beep.
•
Place the cookware on the cooking zone
• Press the and or use the slider control to set the power heating level.
• After setting power hearting level the induction plate start to heat automatically.
• Touch the button to switch off the induction plate after you finish cooking. The induction plates
switch to the stand-by mode, display shows
«l»
. After less 1 minute the cooling fan will switch off.
Tip: If no any cookware on the induction plate in a cooking mode, the induction plate don’t hearting and
produce 1-second beep. After 1 minute the induction plate automatically switch in to stand-by mode.
• Touch the and buttons to set the power level. During you touch buttons, the power heating
lights goes on by rotation.
• Touch the or buttons, then use the slider by touching from left to right and back to set
and adjust the power heating level. The power heating lights goes on by rotation.
using the different modes
the poWer heArting level Adjustment
the temperAture Adjustment
Any time you touch the buttons the induction plate produce 1-second beep signal.
• After switch
on
the induction plate and setting the power hearting level, touch the button two times,
to choose temperature mode. The induction plate produce 1-second beep and the display shows the
temperature 160°C, power heating level lights goes on and the temperature mode light goes on too.
• Touch the and buttons to set the temperature. During you touch buttons, the display shows
temperature from 60°C to 240°C. Choose the temperature and the induction plate automatically start
heating
• Use the slider by touching from left to right and back to set and adjust the temperature heating. The
display shows temperature from 60°C to 240°C. Choose the temperature and the induction plate
automatically start hearting