Oursson BL1000TD, Instruction Manual

Page: 10 / 20

10
activities, arising from the use of or inability to use
the product.
9. Due to continuous product improvement, design
elements and some technical specifications are
subject to change without prior notice from the
manufacturer.
Using the product when after the terms of use
(lifetime):
1. Lifetime set by OURSSON AG for this product
applies only when the product is used exclusively
for personal, family or household needs, as well
as the consumer observes the correct operation,
storage and transportation of products. Under
thecondition of careful handling of the product and
compliance with the rules of operation the actual
life may exceed the lifetime set by OURSSON AG.
2. At the end of the product lifetime, you should
contact an authorized service center for to con-
duct a preventive maintenance of the product and
determine the suitabilityfor further use. Work on
conducting a preventive maintenance of the prod-
ucts is also made in service centers on paid basis.
3. OURSSON AG does not recommend the use of
this product after the end of its lifetime without
its preventive maintenance by the authorized
service center, since inthis case, the product can
be dangerous to the life, health or property of the
consumer.
product Recycling and Disposal
This appliance has been identified in accordance
with the European directive 2002/96/EG on Waste
Electrical and Electronic Equipment – WEEE.
After the expiration of the lifetime, the product cannot
be disposed with another household waste. Instead,
it shall be deposited in the appropriate recycling col-
lection point for electrical and electronic equipment
for proper treatment and disposal in accordance
with federal or local law. By disposing correctly this
product, you will help to conserve natural resources
and preventing the product from damaging the
Date of manufacture
Each product has a unique serial number in the form
of alphanumeric row and is duplicated with a bar-
code that contains the following information: name
of the product group, date of manufacture, serial
number of the product.
OURSSON AG
Made in China
If you have questions or problems with OURSSON AG products - please contact us by e-mail:
support@oursson.com
This manual is under protection of international and EU copyright law. Any unauthorized use of the instructions, in-
cluding copying, printing and distribution, but not limited to, involves the application of the guilty person to civil liability
and criminal liability.
Contact information:
1. Manufacturer of goods - OURSSON AG (Orson AG) Rue du Grand-Chêne 5, 1003 Lausanne, Switzerland.
2. Certification information product available on the website www.oursson.com.
Serial number is located on the rear of the product,
on the package and the warranty card.
The first two letters-correspondence to the product
group (blender - BL).
The first two digits – year of manufacture.
The second two digits – month of manufacture.
The last two digits – serial number of product.
To avoid misunderstandings, we highly rec-
ommend you to read carefully the instruc-
tion manual and the warranty obligations.
Check the correctness of the warranty card.
Warranty card is valid only if the following
are correctly and clearly stated: model, se-
rial number, date of purchase, clear stamps,
buyer’s signature. The serial number and the
model of the device must be the same as in
the warranty card. If these conditions are not
fulfilled or the data specified in the warranty
card was changed, the warranty card is in-
valid.
environment and human health. For more informa-
tion on the collection point and recycling
of this product, please contact your local
municipal authorities or the enterprise for
household waste disposal.