Oursson AM6240/DC, Operation Manual, Page: 12 / 45

12
FOR FIRst-tIMe use
FIrSt-tIme uSe
POWer On
• every time powering on the coffee machine, it will automatical-
ly complete heating and cleaning for one time, and the process
cannot be stopped. the coffee machine can only be used after
finished the above cycle process.
• During the cleaning process, some hot water may flow out of
the coffee spout into the drip tray. Please avoid contacting the
spilling hot water.
Welcomes.
Welcomes.
self-testing of the coffee machine.
the coffee machine begins to heat up. Heating system will automatically
stop when it reaches the proper temperature to make coffee or steam.
the coffee machine begins to heat up. Heating system will automatically
stop when it reaches the proper temperature to make coffee or steam.
Coffee machine automatically cleans the brewing unit and both coffee
spouts after heating (аutomatic-clean process is to make coffee fresh
enough).
Coffee machine automatically cleans the brewing unit and both coffee
spouts after heating (automatic-clean process is to make coffee fresh
enough).
the coffee machine is ready to makecoffee after cleaning.
the machine is ready. Please begin to make coffee.
Please ensure the power is connected, and then press the power button.
Please ensure the power is connected, and then press the power button.
• As the machine has been tested at factory, there may be a little
coffee powder left over. We promise the machine is brand new.
• the coffee machine will start self-testing and cleaning at the
first-time use, this helps the coffee machine to achieve the best
working condition, and this process cannot be skiped.
• During the cleaning process, some hot water will outflow from
the coffee spout into the drip tray. Please pay attention to avoid
contacting with the spilling hot water, not to be scalded.
1
1
1
1
2
2
2
3
3
3
2
4
4
4
3
5
5
4