7
DNA:
TeliaSonera:
Elisa:
Saunalahti:
Tele Finland:
+358447983500
+358405202000
+358508771010
+358451100100
+358405202330
Products:
EH-60
EH-686
Products:
EH-203, version 2.18
EH-105, version 1.75
Detailed instructions for commencing use of the text mes-
sage connection are presented in the ”GSM modem instal-
lation” and ”Protection” sections of the user manual.
Message Centre number:
Change the message centre number to +358447983500.
The message centre number can be changed by a text
message. Send the message to the control device as fol-
lows:
(EH01=device code, 0000=service code. Note the spaces in the
message, and that the codes for the device may have changed.)
As of version 2.4.9, the default for the EH-60 device is the DNA
message centre number.
PIN code:
The PIN code for all program versions of the EH-686 is
0000. For the EH-60, the PIN code used to be 0000, but
has changed to 1234 as of version 2.4.9 (sold after 1 March
2008).
The PIN code for the SIM card in the GSM modem must be
the same as the device PIN code. If necessary, first change
the SIM card PIN code to 0000. The PIN code can be
changed by using the card in a GSM phone.
For security reasons, the PIN code should be changed after
the GSM modem has been installed. This is done by send-
ing the following text message to the EH-60/EH-686:
The regulator will send a reply message showing the
device ID, service code and PIN code. Edit the reply by
replacing the old code with a new one and send it back to
the control device. Then make the PIN code of the GSM
modem’s SIM card identical by using the SIM card in a GSM
phone.
EH-60/EH-686 device switches
The factory default positions of switches on the EH-60
are correct. If the EH-686 has been configured using a PC,
the switch positions may have been changed. In this case,
check the switch positions:
Required settings for regulator/control device
Go to special regulator maintenance and the
”Text message settings” section:
Message Centre number:
Check that the message centre number set for the regu-
lator is +358447983500.
PIN code:
The factory default PIN code setting for the SIM card
is 1234. We recommend changing the code for security
reasons. First install the SIM card in a GSM phone. After
changing the PIN code, transfer the SIM card to the mo-
dem. Set the same PIN code for the regulator as for the
SIM card in the GSM modem.
Modem type:
On the regulator, select Ouman/Fargo as the modem type.
Perform start-up or modem initialization with the
regulator so that it will begin to use the modem:
If the GSM modem is connected to an EH-203 regulator,
perform the start-up function.
The start-up function is performed by going to the regu-
lator’s Start section, pressing OK and exiting the start-up
mode with ESC without changing any settings.
If the GSM modem is connected to an EH-105 regulator,
perform modem initialization.
Initialization is performed by going to the regulator’s
”modem initialization” section, pressing OK and exiting
with ESC.
Message Centre number:
EH01 0000 HÄL.NUMEROT: nro5: SANOMAKESKUS +358447983500
--------------------------------------------------------
EH01 0000 SUOJAUS
-----------------
Product disposal:
The enclosed marking on the additional material of
the product indicates that this product must not be
disposed of together with household waste at the
end of its life span. The product must be processed
separately from other waste to prevent damage
caused by uncontrolled waste disposal to the environment
and the health of fellow human beings.
The users must contact the retailer responsible for having
sold the product, the supplier or a local environmental au-
thority, who will provide additional information on safe recy-
cling opportunities of the product. This product must not be
disposed of together with other commercial waste.
Switch is in the
BOTTOM position
Communication mode
is MODEM + SMS
