Page | 10
Powering On
To power on the
Lynq PRO
™, press and hold the Menu/Select button on the device for 3 seconds. The
Lynq PRO
™ will
boot and the
Lynq PRO
™ logo will appear on the screen. Press the Down arrow button to remove the startup screen and
display the main menu.
Note:
The light on the screen will be off by default. To enable, use one of the following options.
•
At the startup screen, press the Up arrow on the device.
•
At any other location within the device, press and hold the Menu/Select button for up to 3 seconds
Powering Off
To power down the
Lynq PRO
™:
1.
From the Main Menu select “Power Off”.
2.
In the Power Off window, select “Yes”.
Acquiring GPS Signal
Once the
Lynq PRO
™ is on, it will start acquiring a GPS system lock. For best performance, the
Lynq PRO
™ should be in
an open environment away from any equipment that may impede the signal.
Calibrate Compass
To calibrate the compass on the
Lynq PRO
™, move the
Lynq PRO
™ in a figure eight motion. It could take up to 30
seconds to calibrate the compass.
DRAFT
Summary of Contents for Lynq PRO OTTOVL01
Page 31: ...Page 31 NOTES DRAFT...
Page 32: ...Page 32 DRAFT...