OTTO 750/1500 Fast Charger V2
• OMM
-000091
• REV.
B
33
© Clearpath Robotics Inc. 2021. All rights reserved. CLEARPATH and OTTO are trademarks of Clearpath Robotics Inc. All other product and company names listed are trademarks
or trade names of their respective companies. The information contained in these documents is the Confidential and/or Proprietary property of Clearpath Robotics Inc. and may not
be duplicated, reproduced or further disclosed without the express written approval of Clearpath Robotics Inc.
10.3.2
Charger Contacts Location Selection
Ensure enough empty space exists around the chosen location to meet the navigational requirements
outlined in ICD-000096 - OTTO 750/1500 Charger V2 Station Layout.
Avoid locations with:
•
Temperature and humidity extremes
•
Excessive debris accumulation
•
Airborne debris present
•
Flowing, standing, or misting liquids or fluids
•
Direct sunlight
1.
Select an area with as flat a floor grade as possible, free of large cracks or bumps.
2.
Clean the selected area.
3.
Using the Philips head screwdriver, remove the Charger Contacts cover by unscrewing the 21 x M5
screws securing the cover in place.
Figure 11 Charge Dock Cover Removal
4.
Using the 3 mm Hex key, remove the sensor array by unscrewing the 3 x M5 x 10 mm BHCS as
shown in the following diagram.
Figure 12 Sensor Array Removal
Summary of Contents for 1500 Fast Charger V2
Page 50: ......