1
481G74=SE006 Drive wheel adapter
The drive wheel adapter can be adjusted vertically to 5 positions. The quick-release axle mounting can also be fine-
tuned in 2 additional positions in the drive wheel adapter.
Adjusting the vertical position of the drive wheel adapter
1) Remove the wheels.
2) Remove the Allen head screws/counter nuts (see fig. 2).
3) Push the drive wheel adapter to the desired position (see fig. 3).
4) For fine-tuning, rotate the drive wheel adapter by 180° on the frame so that the row of bores is at the "top" or
"bottom".
5) Insert and tighten the Allen head screws/counter nuts to
7 Nm
(see fig. 2).
→
Once changed, the left and right drive wheel adapters must both have the same vertical position in the frame.
2
3
6.2.2 Adjusting the depth of the drive wheels
Changing the drive wheel position has the following effects:
Position of drive wheel
Effects
Move backwards (passive setting) •
Larger wheelbase
•
Larger turning circle
•
Greater stability of the wheelchair
•
Wheelchair is harder to tip backwards when crossing obstacles
•
Position recommended for inexperienced users
Move forwards (active setting)
•
Smaller wheelbase
•
Less load on caster wheels = greater manoeuvrability
•
Less stability of the wheelchair
•
Wheelchair is easier to tip backwards when crossing obstacles
INFORMATION: An anti-tipper should be installed if necessary.
•
Setting recommended only for experienced users
10
Settings
Start M2S, Start M2
