32
Attaching the wheel lock for one-handed opera-
tion (M3)
Disassemble the standard wheel locks as described
above and instead mount the component group
provided.
Positioning of the brake cable must take place with frame unfolded.
Feed the brake cable as shown in the photo, along the frame and across to the opposite side. Then feed the
brake cable back forwards to the opposite wheel lock.
Put the end of the brake cable into the brake with the brake handle.
Insert the brake cable through the bore hole in the cable attachment pin and lightly clamp the brake cable by
tightening the nut. Set the brake function by adjusting the brake cable so as to obtain an even braking effect on
both sides. Cut off the brake cable to approx. cm only after all settings have been made. Put the provided
cable end sleeve onto the end of the brake cable and clamp the cable end sleeve using side cutting pliers.
