CAUTION
Improper mode switching
Falling due to unexpected behaviour of the product because of changed damping behaviour.
►
Ensure that the patient stands securely during all switching processes.
►
Inform the patient that the changed damping characteristics have to be verified after switching and feedback
from the acoustic signal emitter must be observed.
►
Switching back to basic mode is mandatory once the activities in MyMode have been completed.
►
If required, take the weight off the product and correct the switching.
CAUTION
Incorrect assembly/disassembly and improper use of footshell
>
Falling due to unexpected product behaviour as the result of malfunction.
>
Falling due to breakage of load-bearing components.
►
Use the prosthetic foot only in combination with the footshell.
►
Remove the footshell from the prosthetic foot only when necessary.
►
Only use the 2C101 changing device and the 704G30 clamping device for mounting/removing.
►
Replace worn footshells. Do not use the prosthetic foot when the footshell is damaged.
CAUTION
Using prosthetic foot without footshell
Falling due to slipping when walking on smooth floor surfaces (tiles).
►
Do not use the prosthetic foot without the accompanying footshell.
CAUTION
Using prosthetic foot with a damaged foot shell
>
Falling due to unexpected product behaviour as the result of malfunction.
>
Falling due to breakage of load-bearing components.
►
Do not use the prosthetic foot when the foot shell is damaged. Replace damaged foot shells immediately,
before using the product again.
3.9 Notes on the safety modes
CAUTION
Using the product in safety mode
Falling due to unexpected product behaviour because of changed damping behaviour.
►
The warnings/error signals (Warnings/error signals) have to be observed.
CAUTION
Safety mode cannot be activated due to malfunction caused by water penetration or mechanical damage
Falling due to unexpected product behaviour because of changed damping behaviour.
►
Using the product when it is defective is prohibited.
►
The product must be inspected by an authorised Ottobock Service Centre.
CAUTION
Safety mode cannot be deactivated
Falling due to unexpected product behaviour because of changed damping behaviour.
►
If safety mode cannot be deactivated by recharging the battery, a permanent error has occurred.
►
Using the product when it is defective is prohibited.
►
The product must be inspected by an authorised Ottobock Service Centre.
19
1B1-2=* Meridium
Safety