Otto Bock Juvo, Instructions For Use Manual

Page: 8 / 124

2 Product description
2.1 Function
The wheelchair is designed solely for individual use by persons who are unable to walk or who have a walking
impediment, and can be operated either by the patient or by an attendant.
The wheelchair can be used on solid ground both indoors and outdoors.
The power wheelchair is equipped with rear-wheel drive for good directional stability and to enable a small turning
radius.
The drive system with two 12 V batteries combined with spring-mounted drive wheels allows obstacles to be
crossed easily (Category B according to EN 12184) and offers safe operating performance.
The power wheelchair is equipped with front-wheel drive for excellent directional stability.
The drive system with two 12 V batteries combined with spring-mounted drive wheels allows obstacles to be
crossed easily (Category B according to EN 12184) and offers safe operating performance.
The power wheelchair is equipped with mid-wheel drive for good directional stability and to enable a very small
turning radius.
The drive system with two 12 V batteries combined with spring-mounted drive wheels allows obstacles to be
crossed easily (Category B according to EN 12184) and offers safe operating performance.
The power wheelchair is controlled by the VR2 wheelchair control device (see Page 25). The latter includes a con­
trol panel to enter driving commands and display the current status as well as a controller that operates the drive
motors and other electrical functions based on the inputs.
The power wheelchair is controlled by the R-Net wheelchair control device (see Page 25). The corresponding
TEN° control panel serves to enter driving commands and display the current status. The control electronics in the
controller make it possible to control the drive motors and other power functions based on the input data.
The special features of the power wheelchair include:
•
Individual adaptation possibilities for control device using programming and options.
• Individual adaptation possibilities with options and custom fabrication using modular components (chassis,
seating system, control device, accessories).
• Modular design that allows the power wheelchair to be equipped with additional modules and installed equip­
ment in addition to the main components, such as power seat adjustments, special controls, tray.
• Serviceability due to easy, straightforward access to all components.
8
Product description
Juvo