Otto Bock Juvo, Instructions For Use Manual

Page: 75 / 124

6.14.4 Adapter cable for Piko button
• The adapter cable makes it possible to connect Piko buttons for control functions.
• The Piko buttons, which are connected in pairs, are used to control power seat functions as well as other func­
tions. These functions are specified when the power wheelchair is ordered.
• If e.g. the chin control is connected, the chin control moves to the active position when a button is pressed.
The chin control moves back to the passive position when the second button is pressed.
Available functions
The following functions can be controlled directly with the Piko buttons:
•
Chin control
• Power seat height adjustment
• Power back angle adjustment
• Power seat tilt
• Combined seat height adjustment/seat tilt
• Power legrest left
• Power legrest right
6.14.5 Joystick top
70
The joystick top enlarges the support surface for the
hand, thereby making it easier to operate the input
device.
6.15 Special controls
6.15.1 Safety
6.15.1.1 General safety instructions
CAUTION
Improper use
Injuries due to falling, tipping over of the wheelchair. Damage to the special control equipment.
► Only use the special controls for their original intended purpose.
CAUTION
Driving without experience with the special control
Injuries due to falling, tipping over or collision of the wheelchair.
► Prior to initial use, practise handling the special control on level, open ground and under the supervision of
appropriately trained attendants.
CAUTION
Extreme temperatures
Hypothermia or burns through contact with components, failure of components
► Do not expose the product to any extreme temperatures (e.g. direct sunlight, sauna, extreme cold).
75 Juvo
Use