Otto Bock Invader 480S26 10000 K, Instructions For Use Manual

Page: 42 / 48

73 74
Inflating the tube
1) Ensure that the valve is positioned perpendicularly for proper positioning of the tube and tyre in the region of
the valve.
2) Firmly screw on the valve nut.
3) Inflate the tube so that the tyre can still be pressed in easily with your thumb.
INFORMATION: If the circumferential lines on the two sides of the tyre are both at an even distance
from the rim, the tyre is centred. If not, let some air out and realign the tyre.
4) Inflate the tube to the maximum pressure specified by the tyre manufacturer (see information printed on the tyre
sidewall).
5) Firmly screw the valve cap onto the valve.
11 Disposal
11.1 Disposal information
Return the product to the qualified personnel for disposal.
All components of the product must be disposed of properly in accordance with the respective national environ­
mental regulations.
11.2 Information on re-use
CAUTION
Used seat padding
Functional and/or hygienic risks due to re-use
►
Replace the seat padding if the wheelchair is to be re-used.
The product is generally suitable for re-use. However, please note that the product with its permanently welded
dimensions was tailored to one individual.
Similar to second-hand machines or vehicles, products that are being re-used are subject to increased strain. Fea­
tures and functions must not change in a way that could endanger users or other persons during re-use.
The product must first be thoroughly cleaned and disinfected before it can be re-used. Then the product must be
examined by an authorised specialist to check the condition and to look for wear and possible damage. All worn
and damaged parts as well as components which do not fit or are unsuitable for the new user must be replaced.
Detailed information on replacing components as well as information on the required tools and the prescribed ser­
vice intervals can be found in the service manual.
12 Legal information
All legal conditions are subject to the respective national laws of the country of use and may vary accordingly.
12.1 Liability
The manufacturer will only assume liability if the product is used in accordance with the descriptions and instruc­
tions provided in this document. The manufacturer will not assume liability for damage caused by disregarding the
information in this document, particularly due to improper use or unauthorised modification of the product.
42
Disposal
Invader 480S26=10000_K