0
Note!
Subject to technical changes.
4.1.4 Retrofitting / replacing / adjusting the transport wheels
First, proceed as described in Section 4... Follow the same process to install a second multi-
function adapter across from the rear wheel attachment in order to attach the transport wheels
on both sides.
Then press in the spring-mounted push button on the transport wheel (Figure ) and push it
onto the multi-function adapter to the desired mounting position. Follow the same procedure on
the other side.
4.1.5 Retrofitting / replacing the crutch holder
First, proceed as described in Section 4... Then press in the spring-mounted push button on the
crutch holder (Figure 0) and push the crutch holder onto the multi-function adapter to the desired
mounting position. Attach the hook and loop strap to hold the crutches to the back tube.
To replace the bucket, loosen the screw connection on the bottom and remove the bucket (Fig-
ure ). Put a new bucket in place and secure it with the screw removed from the old one.
0
