►
Instruct the user in the safe use of the product.
►
Please contact the manufacturer if you have questions about the
product or in case of problems.
►
Report each serious incident related to the product to the manufacturer
and to the relevant authority in your country. This is particularly import
ant when there is a decline in the health state.
►
Please keep this document for your records.
These instructions for use provide you with important information on the use,
adaptation and handling of the product.
Only put the product into use in accordance with the information contained
in the accompanying documents supplied.
2 Product description
2.1 Function
9X50 linear control element function
The 9X50 linear control element is installed in the definitive socket. The
switching points are reached by pulling on the bow. When the 9X50 linear
control element is not under load, the control signal is 0 volts. When the bow
is pulled to maximum, the control signal corresponds to the maximum elec
trode signal of an electrode.
9X51 4-stage control element function
Pulling on the bow of the 9X51 4-stage control element generates a control
signal. Output signals of various strengths are simulated depending on the
ratchet position, making it possible to switch between the various compon
ents with corresponding configuration of the prosthesis.
2.2 Combination possibilities
This product can be combined with the following Ottobock components:
•
DynamicArm: 12K100N=*/12K110N=*
•
ErgoArm Hybrid plus: 12K44=*
•
ErgoArm Electronic plus: 12K50=*
•
AxonMaster 13E500
•
System Electric Hand DMC plus: 8E38=6, 8E39=6
•
System Electric Hand Digital Twin: 8E38=7, 8E39=7
•
Sensor Hand Speed: 8E38=8, 8E39=8
•
MyoHand VariPlus Speed: 8E38=9, 8E39=9, 8E41=9
•
Transcarpal Hand DMC plus: 8E44=6
•
System Electric Greifer DMC VariPlus: 8E33=9, 8E34=9
•
8E70=* bebionic hand EQD
12
Summary of Contents for 9X50
Page 2: ...1 2 3 4 5 2 ...
Page 91: ...91 ...
