18
5) Turning the Allen key clockwise moves the
thumb towards the palm (reducing the dis
tance).
Turning the Allen key counterclockwise
moves the thumb away from the palm
(increasing the distance).
INFORMATION: The effect of the rota
tion movement applies for both the
right and left bebionic hands.
The movement of the thumb cannot be
observed while the adjustment is being
made. An adjustment of one turn is suffi
cient.
6) Mount the terminal device on the prosthetic
socket and, with the energy supply turned
on, check the contact point by closing the
terminal device. If the adjustment of the
contact point was not sufficient, open the
hand fully and perform the adjustment
steps again.
6.3 Configuring with the "be" adjustment software
6.3.1 Introduction
The "be" adjustment software makes it possible to optimise the product settings and
grips for a patient. All settings have to be checked together with the patient.
Please consult the integrated online help in the adjustment software for further information.
INFORMATION
See the instructions for use of the adjustment software for information about the adjustment soft
ware, installation and establishing a connection to the product.
INFORMATION
Cybersecurity
►
Keep your operating system up to date and always install any available security updates.
►
Protect your computer from unauthorised access (e.g., by using virus scans, password pro
tection etc.).
►
Do not use unsecured networks.
►
Please contact the manufacturer if you suspect cybersecurity problems.
6.3.2 Data transfer between the product and the PC
Product settings using the adjustment software can only be made via Bluetooth data transfer. For
this purpose, a Bluetooth wireless connection must be established between the product and the
PC using the B33061 Bluetooth adapter. To install the Bluetooth adapter for the first time, follow
the procedure described in the instructions for use for the "560X12=V* be" adjustment
software.
6.3.3 Preparing the product to connect to the adjustment software
In order to activate the Bluetooth function of the terminal device, carry out the following steps:
>
The prosthesis is switched on.
►
Hold the program switch on the back of the terminal device for at least 6 seconds until two
long beeps are heard.
→
The Bluetooth function of the terminal device is activated.
