Otto Bock 6A30-20, Instructions For Use Manual

Page: 15 / 188

► If the product is damaged, check it for proper function and readiness
for use.
► In case of changes in or loss of functionality, do not continue using the
product (see "Signs of changes in or loss of functionality during use" in
this section).
► Take any necessary measures (e.g. repair, replacement, inspection by
the manufacturer's customer service, etc.).
Signs of changes in or loss of functionality during use
Among other factors, changes in functionality can be indicated by an altered
gait pattern, a change in the positioning of the prosthetic components relat­
ive to each other and by the development of noises.
4 Scope of delivery
6A30=20 Shuttle Lock
Quantity Designation Reference number
1 Instructions for use –
1 Shuttle lock housing 5X120
1 Ratchet unit 6A52=K
1 Pin 6Y13=1
1 Set screw 506G21=M4x10
1 Dummy set
Consisting of:
1 plate dummy, 1 ratchet unit
dummy, 1 countersunk head screw, 4 nails
5X108
1 Dummy set
Consisting of:
1 cap screw, 1 sleeve dummy, 2
O-rings
6A94
Spare parts/accessories (not included in the scope of delivery)
Quantity Designation Reference number
– Pin, short 6Y13=2
– Pin, long 6A13=L1
5 Preparation for use
CAUTION
Incorrect alignment or assembly
Risk of injury due to damaged prosthetic components
► Observe the alignment and assembly instructions.
15