Otto Bock 50C91, Instructions For Use Manual

Page: 14 / 120

> The patient is standing or sitting down.
> Open the hook-and-loop closure on one side of the brace.
1) Place the inside of the brace on the neck from the front (see fig. 4 or see
fig. 7).
2) Place the outside of the brace on the neck from behind.
→ The chin rests on the recess.
3) Fasten the hook-and-loop closure again (see fig. 5 or see fig. 8).
4.4 Cleaning
NOTICE
Use of improper cleaning agents
Damage to the product due to use of improper cleaning agents
►
Only clean the product with the approved cleaning agents.
Clean the brace regularly:
1) Fasten all hook-and-loop closures.
2) Hand wash the brace in warm water at
30 °C
(86 °F) with standard mild
detergent.
3) Rinse well.
4) Allow to air dry. Do not expose to direct heat sources (e.g. sunlight,
stove or radiator).
5 Disposal
Dispose of the product in accordance with national regulations.
6 Legal Information
All legal conditions are subject to the respective national law of the country
of use and may vary accordingly.
6.1 Liability
The manufacturer shall be liable in the event that the product is used in
accordance with the descriptions and instructions in this document. The
manufacturer will not assume liability for damage caused by disregard of this
document, particularly due to improper use or unauthorized modification of
the product.
6.2 CE Conformity
This product meets the requirements of the European Directive 93/42/EEC
for medical devices. This product has been classified as a class I device
according to the classification criteria outlined in Annex IX of the directive.
14 | Ottobock