Otto Bock 436P2 L1-7, Instructions For Use Manual

Page: 20 / 244

Before using the product, verify that it is securely mounted and in an ergo­
nomically correct position. Inform the qualified personnel if corrections are
required.
7.2 Use in vehicles for transporting persons with reduced mobility
WARNING
Improper use in vehicles for transporting persons with reduced
mobility
Severe injuries to the user or third parties due to flying components
► The product may
not
be used to position the passenger during trans­
portation in a vehicle for transporting persons with reduced mobility.
► The product has to be removed from the wheelchair or seating shell
mobility base and safely stowed in the vehicle during transportation in a
vehicle for transporting persons with reduced mobility.
7.3 Care
CAUTION
Lack of or improper cleaning
Health hazard due to infections, damage to the product due to user error
► Clean the product at regular intervals.
► Do not clean the product with a jet of water or a pressure washer. The
penetration of water can cause corrosion and subsequent malfunc­
tions.
7.3.1 Cleaning
Clean the product regularly depending on the degree of soiling and fre­
quency of use,
at least 1x per month
:
• Use warm soapy water for cleaning. Add some disinfectant if needed.
Carefully dab the product with a damp cloth or sponge and wipe with a
dry, clean cloth.
•
Do not wash the product in the washing machine.
The penetration of
water can cause corrosion and subsequent malfunctions.
• Do not use any aggressive cleaners, solvents or hard brushes etc.
• Allow the product to fully air dry before use.
• Do not expose the product to direct heat (e.g. sunshine, stove or radiator
heat, hair dryer).
7.3.2 Disinfection
• Thoroughly clean the product before disinfecting.
• Wipe all parts of the product with a disinfectant.
20