Otto Bock 436A2 Series, Instructions For Use Manual

Page: 23 / 264

► The product has to be removed from the wheelchair or seating shell
mobility base and safely stowed in the vehicle during transportation in a
vehicle for transporting persons with reduced mobility.
7.3 Care
CAUTION
Lack of or improper cleaning
Health hazard due to infections, damage to the product due to user error
► Clean the product at regular intervals.
► Do not clean the product with a jet of water or a pressure washer. The
penetration of water can cause corrosion and subsequent malfunc­
tions.
7.3.1 Cleaning
Clean the product regularly depending on the degree of soiling and fre­
quency of use,
at least 1x per month
:
• Use warm soapy water for cleaning. Add some disinfectant if needed.
Carefully dab the product with a damp cloth or sponge and wipe with a
dry, clean cloth.
• Do not use any aggressive cleaners, solvents or hard brushes etc.
• Allow the product to fully air dry before use.
• Do not expose the product to direct heat (e.g. sunshine, stove or radiator
heat, hair dryer).
7.3.2 Disinfection
• Thoroughly clean the product before disinfecting.
• Wipe all parts of the product with a disinfectant.
• Only use colourless water-based disinfectants. Observe the instructions
for use provided by the manufacturer.
8 Maintenance and repair
CAUTION
Wear and tear of the padding on the product
Risk of injury due to unallowable continued use, loss of functionality
► Frequent use can result in wearing of the padding surfaces. Have the
product replaced immediately in case of damage.
• The function of the product should be checked before each use .
• Check the product
monthly
for wear and damage.
• Check screw connections
monthly
for tightness.
23