Otto Bock 17PK1 Series, Instructions For Use Manual

Page: 12 / 100

2.2 Components/design
Reference number Item Component
17PK1=14-WR 17PK1=20-WR
1 Countersunk screw
2 Lock cover
3 Perlon cable
4 Compression spring
5 Threaded sleeve 21A12 21A12
6 Lock
29PK1=14 29PK1
7 Upper joint section
8 Receiver for set screw
9 M4x12 set screw 506G21=M4x12 506G21=M4x12
10 Bearing bushing
11 Joint bolt
12 Countersunk screw (17PK1=14-WR)
Cap screw (17PK1=20-WR)
13 Joint nut with M6 interior thread
29PK2=14 29PK2
14 Lower joint section
15 Insertion zone for bar
16 Countersunk screw (17PK1=14-WR)
Cap screw (17PK1=20-WR)
17 Parallel truing tube adapter
(17PK1=14-WR only)
18 Parallel truing tube
29PK4=14 29PK4
Not included in the scope of delivery (see fig. 1)
Item
Quantity
[Piece
(s)] Designation Reference number
19 1 Side bar 651P4*, 605P8*
3 Intended use
3.1 Indications for use
The waterproof orthotic joints made of plastic are to be used exclusively in
pairs for lower limb orthotic fittings in waterproof walking devices.
The waterproof walking aid is intended for use in wet areas, e.g. transfer
into a pool, and is not a replacement for the initial orthosis.
3.2 Indications
• Partial or total paralysis of the leg muscles
12