Otterbine Barebo Inc.
2
75-0109 AirFlo 3
www.otterbine.com
1-800-AER8TER
AIRF LO 3 EQUIPMENT
A. Unpack and Inspect
1. Inspect the AirFlo 3 System received and report any shipping damage to the carrier which delivered your Otterbine
aeration system.
B. Check Equipment Received is as Specified
1. Compressor Cabinet: Constructed of 304 Stainless Steel this houses the air compressors, valve manifolds, ventilation
fans and the main switch. Check the nameplate to verify you have received the correct AirFlo 3 compressor cabinet and
voltage rating for the system ordered. (See Illustration on Page 3)
C. Tubing
1. Verify that you have received the correct type and quantities of tubing kits, poly unweighted and/or weighted, for your
application.
D. Air Diffuser Manifold Base
1. Check the correct quantity and types, single or dual disc, Diffuser Manifold Base/s were received. (See Page 8)
For proper warranty consideration register on line:
www.otterbine.com/warrantyform
or return warranty registration
card by mail to
OTTERBINE
within fifteen (15) days of receipt by the Purchaser at retail in order to avoid delays:
INSTALLATION TOOLS AND EQUIPMENT
A. Basic Installation Tools and Materials Required for Installation
1. All-purpose gravel: For weighting the Disc Diffuser Manifold Bases, approximately 20lbs. per Diffuser Manifold Bases.
2. 100’ lengths of 1/8” Nylon Rope for installing Disc Diffuser Manifold Bases.
3. Shovel and Pick, Level, possibly a boat or raft.
4. Hand Tools: 5/16” Nut Driver or Wrench, Adjustable Wrench, Pump Pliers, Tubing Cutter or Utility Knife.
COMPRESSOR CABINET INSTALLATION
A. Placement
1. Select a location for the AirFlo 3 compressor cabinet where it will not be exposed to flooding or corrosive chemicals.
2. Allow a minimum of 6” (15 cm) clearance on all sides of the AirFlo 3 cabinet to any walls or other obstructions.
3. To provide flexibility for mounting the AirFlo 3 compressor cabinet four (4) mounting holes are provided on the bottom
of the cabinet which will accept up to a 1/2" or M14 size bolt. The AirFlo 3 cabinet should be placed directly on a level
prepared gravel or concrete base, or equipment pad.
TOP VIEW
MOUNTING
BOLT HOLE
PATTERN
