ET5200PpH-DR
Hardened IP CCTV Self-Configured 5-port 10/100/1000Base-T with 4-port PoE+ Ethernet Switch
4
V1.1
Power and Alarm Connection
：
Pin
Description
V1 -
V1 +
ALM
V2 -
V2 +
Power Input
GND
+48~57V
(DC)
Normal
Open
GND
+48~57V
(DC)
Cable Connections
Signal Type
Cable Type
Connector
Ethernet
Cat. 5 or above
RJ45
Power supply 1
Power cable
6-pin Terminal Block
（
Pin 1/2
）
Power supply 2
Power cable
6-pin Terminal Block
（
Pin 5/6
）
ALM
2 wire
6-pin Terminal Block
（
Pin 3/4
）
LED Indicators
Indicator
Color
Status
Description
PW1
Green
ON
Powered on
PW2
Green
ON
Powered on
ALM
Green
ON
On when one of the power supplies are off
IGMP
Green
ON
Enable IGMP Snooping
OFF
Disable IGMP Snooping
PoE Port
(P1-P4)
PoE
Amber
ON
PoE is activated.
Blinking
A Power Device (PD) is being detected.
OFF
No device is connected/ the connected device is not a PD.
LINK/ACT
Green
ON
A network device is connected
Blinking
The connected device is transmitting/ receiving data.
OFF
No network device is connected
G1 Port
SPD
Amber
ON
Ethernet link at 1000Mbps.
OFF
Ethernet link at 10/100Mbps or off link.
Dip Switch
ALM
ON
Enable Power Failure Alarm (Default setting)
OFF
Disable Power Failure Alarm
IGMP
ON
Enable IGMP Snooping (Default setting)
OFF
Disable IGMP Snooping
Port
ON
Enable Port Failure Alarm
OFF
Disable Port Failure Alarm
