User Manual
There is no power.
There is no sound.
There is no bass.
I hear buzzing
or humming.
• Press the POWER button on the remote control or on the top of your
Soundbar.
• Eusure the power cord is securely connected.
• Ensure the light on the power adapter is glowing green.
• Plug a different device into the electrical outlet to verify that the outlet is
working correctly.
• Increase the volume. Press Volume Up on the remote control or on the
top of your Soundbar.
• Press MUTE on the remote to ensure the Soundbar is not muted.
• Press INPUT on the remote or on the top of your Soundbar to select a
different input source.
• If you are trying to use the 3.5mm output from your TV, ensure it is the
OUTPUT connector you are using. Some TVs use 3.5 mm audio
INPUT for devices such as computers.
• Your TV may be set to variable audio output. Confirm that the audio
output setting is set to FIXED or STANDARD, not VARIABLE. Consult
your TV’s user manuel for more detailed information.
• Ensure all cables and wires are securely connected.
• Connect a different source device (TV, Blu-ray player, etc) to see if the
buzzing persists. If it does not, the problem may be with the original device.
• Connect your device to a different input on the Soundbar.
• Press the SUB + button on the remote control to increase the bass level.
Ensure the Subwoofer is linked to the Sound Bar. See Re-Linking the
Subwoofer on the previous page.
There is too
much bass.
• Press the SUB - button on the remote control to decrease the bass level.
●
HELP & TROUBLESHOOTING
1. The system should not be placed in hot, humid environment should not
be exposed to rain or subjected to strong impact.
2. There are no customer-serviceable parts in this product, to prevent
electric shock and other accidents do not try to service this product
yourself. Refer all servicing to qualified service personnel.
3. If you accidentally spill liquid on or in any part of the speaker, you should
immediately switch off the power, and then arrange for it to be checked by
qualified service personnel before you use it again.
4. When connecting the system to a source with a large signal volume, do
not set the input on the source to maximum, it should be set to the level
where no distortion can be detected.
5. If you are not going to use your speaker for an extended period
of time always switch off the power at the mains power socket.
Note
10