User Manual
●
WALL MOUNTING THE SOUNDBAR
Remove the screw from the Soundbar
stands and rotate as shown.
26 3/4”
(67.95 cm)
Be sure your screws are attached to wood
studs or drywall anchors (for drywall) or
concrete anchors (for brick/concrete walls).
Reattach stands using the
included screw.
If you are unfamiliar with power tools or the layout of electrical wiring in
the walls of your home, consult a professional installer.
1
2
LINK
Input
Vol -
V
24V DC
OPTICAL
INPUT 1
INPUT 2
●
RELINKING THE SUBWOOFER
You may need to re-link the Subwoofer to the Soundbar
if there is no sound coming from the Subwoofer and the
white light on the front of the Subwoofer is flashing in
this pattern: LONG ON, SHORT OFF.
2. Press and hold the LINK button on the back
of the Subwoofer for 3 seconds.
The white light on the Subwoofer will begin to
blink rapidly at first, then slowly.
1. Press and hold the INPUT button on the top of
the Soundbar for 3 seconds. The white light on the
front of the Soundbar will begin to blink rapidly.
Mounting hardware not included.
9
3. Press and hold the LINK button again until the white
light blinks rapidly. On releasing the button the light will
change to a solid state, this indicates that the soundbar
and subwoofer are now paired.
LINK
