otometrics Madsen Xeta, Reference Manual

Page: 60 / 108

Frequency change at Store
BC store: Change freq. Method for frequency change when you press Store .
Xeta will automatically test frequencies above 1000 Hz in ascending order, and
frequencies below 1000 Hz in descending order.
Default: Wrap
NO CHANGE
If this parameter is set to “No change”, the setting will remain at the current fre-
quency when you press
Store (the frequency remains the same).
WRAP
If you press
Store
at the highest possible frequency, you switch to the lowest pos-
sible frequency. At other frequencies, pressing
Store
advances the frequency.
BUTTERFLY
If you press Store at the highest or the lowest possible frequency, you change to
1000 Hz.
dB level new transducer
Start level
Choice of initial volume level for a new client/ear, or change between different
tests.
Adjustable in the range: -10 to 50 dB.
dB level new frequency
New freq. level
Choice of initial intensity when changing frequency.
NO CHANGE
Tthe frequency remains the same, or adjustable in the range -10 to 50 dB.
nn dB FIXED
The initial level at each frequency is fixed to the predefined level (nn).
nn dB ABOVE THR
New fixed value above any previously located threshold value (nn).
Masking presentation
Mask. present. Set mode for masking presentation:
NORMAL
The masking signal follows the masking interrupter. The masking signal appears
when button is pressed.
60 Otometrics - MADSEN Xeta
6 MADSEN Xeta Test Settings