10
GN Otometrics A/S
User Manual
CAPELLA Cochlear Emissions Analyzer
1.5
Software installation
The
Capella
software is supplied on the diskette(s) enclosed in a plas-
tic pocket at the back of this User Manual.
To install
Capella
on your PC, proceed as follows:
1.
Insert the diskette (or diskette #1 if there are more than one)
into your diskette drive.
2.
Use the Windows
Run
function to locate and run
Setup
on
the diskette.
3.
Windows will now start the Installation program. Just follow
the on-screen instructions.
4.
By default, the program will install
Capella
under the path for
NOAH.
5.
If you are not using NOAH, you may specify another path.
The
Capella
software is represented by a
NOAH
icon. You can
simplify start up by creating a short cut to
Capella
on the Win-
dows desktop.
1.6
Starting up the system
If
Capella
is running under NOAH, first access NOAH´s Client Mod-
ule. On the toolbar, only the first icon (Client Module) and the last
icon (Help) are active until a client has been selected - all the others
are greyed (inactive). Before proceeding to any of the application
modules, it is first necessary to access the Client Module, and then
to either select an existing client or to add a client to the database.
You are referred to the NOAH or PAX User's Guide for detailed nav-
igation instructions.
After having selected or added a client, click on the Selection of
Measurement Module icon which opens the NOAH/PAX Measure-
ment Selection Screen. Double-click on the
Capella
button. The
Capella
software will now be loaded, and the program will start by
trying to connect with the
Capella
hardware platform - see next chap-
ter.
If not running NOAH, start
Capella
by double-clicking on the
NOAH
icon in the directory where you have installed
Capella
, or on the Win-
dows desktop if you have made a short cut.
