otometrics HORTMANN Aquamatic II, User Manual

Page: 17 / 30

• Temperate setting by coding switches (
Fig. 1 ► 10
, items
C
and
D
).
– left switch
for adjusting the "ten" partition
– right switch
for adjusting the "one" par-
tition
– lower keys (+) (keys below the
switches)
increase temperature
– upper keys (-) (keys above the
switches)
decrease temperature
• Standard settings:
Level for irrigation mode 37° C fixed
Level for cold stimulation 30° C
Level for warm stimulation 44° C
4.2 Selecting temperature levels
• After operating the main power switch, the automatic activation of the thermal process begins for reducing bacterial
count, followed by the automatic activation of the temperature level "irrigation mode" (37° C).
• For selecting the desired temperature level, use the respective key ( Fig. 1 ► 10 , items F , G , and H ).
Display of the active level by illuminated diodes.
Display of the water temperature (current value) in °C.
4.3 Adjusting stimulation time
• By means of coding switch (
Fig. 1
►
10
, item
E
).
4.4 Adjusting flow quantity
• With the lever for water flow (
Fig. 6
►
16
, item
A
) you can adjust the flow quantity at the irrigation handle.
• 2 adjusting possibilities:
High Flow quantity for rinsing the auditory canal
Low Flow quantity for stimulating the vestibular organ
• With the adjusting screw (
Fig. 6
►
16
, item
B
) you can precisely pre-select the flow quantity.
Important
• Periodically check the water flow for the stimulation of the vestibular organ and readjust if necessary.
Otometrics - Aquamatic II 17
4 Operation