oticon sensei BTE13, Instructions For Use Manual

Page: 11 / 36

A
B
2
1
3
20 21
Putting on your hearing aid with
mould and SmartFit ™ Trainer
Your hearing aid may have SmartFit™ Trainer, a guidance tool for inserting the ear mould.
The LED indicator will remain on for up to 20 seconds while the system checks the ear
mould insertion and fit. If the ear mould is NOT inserted correctly, a series of rapid blinks
on the LED will appear.
If the blinks appear, turn the hearing aid off and on again, and reinsert the ear mould.
It may not be possible to insert the ear mould without the rapid blinks appearing. This is
an indication that the ear mould may need replacing.
Your Hearing care professional may enable or disable the SmartFit™ Trainer tool.
Putting on your hearing aid with mould
1. Place the tip of the mould in your ear canal, twisting slightly,
making sure that the top part of the mould (A) is pushed
behind and under the fold (B) of your ear.
2. Gently pull your ear upwards and press the mould in the
direction of the ear canal.
3. With the mould positioned correctly in your ear, place the
hearing aid behind your ear by lifting its lower part and
sliding it over the top of your ear.