20
Using CI-Link
The CI-Link unit powers on (“Power” light indicator turns on) as soon as it is connected to the
PC, and the PC is switched on.
Once the sound processor is connected to CI-Link, during the connection process with the Genie
Medical CI fitting software, the "Left" and "Right" light indicators will successively light up. This
means the software is searching for device connection.
Once the sound processor has been detected, the corresponding “Left”/“Right” light indicator
continuously repeats the same blinking sequence (a medium light followed by two short lights).
The communication between the software and sound processor has been established.
Start the fitting session by launching the Genie Medical CI fitting software from the desktop
shortcut or the Windows programs list. Refer to the Genie Medical CI fitting guide for details on
programming the sound processors and performing objective measurements.
Warning:
Do not attempt to connect or disconnect a sound processor, or cables while the sound
processor is being fitted, as this might damage it.
