PEOPLE FIRST
Oticon Radio Model - Quick Installation Guide
Radio Model Name: Oticon BTE SP
Oticon A/S
Main +45 39 17 71 00
Kongebakken 9
Fax +45 39 27 79 00
DK-2765 Smørum
Denmark
CVR-no. 42334219
3
On the bottom side of the main PCB of the
Oticon BTE SP
radio model the connector for the speaker unit assembly (where the wire antenna for the Bluetooth
radio is an integrated part), the programming connector, EEPROM memory and coil antenna for the 3.84 MHz radio can be seen:
The most important parts inside the Engine module are a Digital-Signal-Processor (DSP), a radio Front-End (FE) chip for the 3.84 MHz radio part and an RF chip
for the Bluetooth radio part – all mounted on a small rigid PCB again mounted on the main flex PCB. The
Oticon BTE SP
radio model also includes all voltage
regulators and buffered data programming inputs on board. The DSP is the main processor controlling the functionality of both radios in the
Oticon BTE SP
radio
model.
The
Oticon BTE SP
radio model is intended to be installed in Oticon, Bernafon, Sonic, SBO Hearing and affiliated wireless hearing aid devices of the
Oticon BTE
SP
(Behind The Ear, Super Power) wearing style.
Oticon BTE SP
Radio Model – Main PCB – Bottom side
